Trim, fill and fair the chine then start on the topsides.
Saturday, 30 December 2017
Another Milestone
Today I resined up the first glass. Took a while but went well.
Trim, fill and fair the chine then start on the topsides.
Trim, fill and fair the chine then start on the topsides.
Tuesday, 26 December 2017
Tuesday, 19 December 2017
Chines Glassed and Filled
Chines Glassed and Filled ready to be fared followed by glassing the bottom with 810gm/m2 Triax.
Saturday, 2 December 2017
Breakthrough
In the photo the 65mm Forstner drill bit burst through bulkhead #7. One can see the tip exactly below the pencilled boat centre line. Sometimes things go just right.
Subscribe to:
Posts (Atom)